Welcome to

The Hastings Hub

Featured image for “Integrating Presses into Continuous Lines: Optimizing Cycle Times and Throughput”
September 17, 2026

Integrating Presses into Continuous Lines: Optimizing Cycle Times and Throughput

Featured image for “Minimizing Scrap with Precision Custom Tooling in Hot Stamping”
September 17, 2026

Minimizing Scrap with Precision Custom Tooling in Hot Stamping

Featured image for “Integrating Industry 4.0: Upgrading Press Controls for Data Acquisition and Traceability”
September 17, 2026

Integrating Industry 4.0: Upgrading Press Controls for Data Acquisition and Traceability

Featured image for “Precision Heat Transfer on Technical Textiles: Controlling Pressure and Dwell Time for Synthetics”
September 17, 2026

Precision Heat Transfer on Technical Textiles: Controlling Pressure and Dwell Time for Synthetics

Featured image for “Total Cost of Ownership: Analyzing Air Consumption in Pneumatic vs. Hydra-Pneumatic Presses”
September 17, 2026

Total Cost of Ownership: Analyzing Air Consumption in Pneumatic vs. Hydra-Pneumatic Presses

Featured image for “Scaling Production: When to Transition to Custom Multi-Head Press Systems”
September 17, 2026

Scaling Production: When to Transition to Custom Multi-Head Press Systems

Featured image for “Solving Common Hot Stamping Defects: Foil Flaking, Blistering, and Poor Adhesion”
September 17, 2026

Solving Common Hot Stamping Defects: Foil Flaking, Blistering, and Poor Adhesion

Featured image for “Calculating ROI on Automated Part Feeding Systems for Hot Stamping”
September 16, 2026

Calculating ROI on Automated Part Feeding Systems for Hot Stamping

Featured image for “Silicone vs. Metal Hot Stamping Dies: Selecting the Right Tooling for Complex Part Geometries”
September 16, 2026

Silicone vs. Metal Hot Stamping Dies: Selecting the Right Tooling for Complex Part Geometries

Featured image for “Automated Hot Stamping for Rigid Plastics: Optimizing Temperature and Dwell Time in Automotive Interiors”
September 16, 2026

Automated Hot Stamping for Rigid Plastics: Optimizing Temperature and Dwell Time in Automotive Interiors

Featured Selections From

The Hastings Hub

Featured image for “Integrating Presses into Continuous Lines: Optimizing Cycle Times and Throughput”
September 17, 2026

Integrating Presses into Continuous Lines: Optimizing Cycle Times and Throughput

Featured image for “Minimizing Scrap with Precision Custom Tooling in Hot Stamping”
September 17, 2026

Minimizing Scrap with Precision Custom Tooling in Hot Stamping

Featured image for “Integrating Industry 4.0: Upgrading Press Controls for Data Acquisition and Traceability”
September 17, 2026

Integrating Industry 4.0: Upgrading Press Controls for Data Acquisition and Traceability

Featured image for “Precision Heat Transfer on Technical Textiles: Controlling Pressure and Dwell Time for Synthetics”
September 17, 2026

Precision Heat Transfer on Technical Textiles: Controlling Pressure and Dwell Time for Synthetics

Featured image for “Total Cost of Ownership: Analyzing Air Consumption in Pneumatic vs. Hydra-Pneumatic Presses”
September 17, 2026

Total Cost of Ownership: Analyzing Air Consumption in Pneumatic vs. Hydra-Pneumatic Presses

Featured image for “Scaling Production: When to Transition to Custom Multi-Head Press Systems”
September 17, 2026

Scaling Production: When to Transition to Custom Multi-Head Press Systems

Featured image for “Solving Common Hot Stamping Defects: Foil Flaking, Blistering, and Poor Adhesion”
September 17, 2026

Solving Common Hot Stamping Defects: Foil Flaking, Blistering, and Poor Adhesion

Featured image for “Calculating ROI on Automated Part Feeding Systems for Hot Stamping”
September 16, 2026

Calculating ROI on Automated Part Feeding Systems for Hot Stamping

Featured image for “Silicone vs. Metal Hot Stamping Dies: Selecting the Right Tooling for Complex Part Geometries”
September 16, 2026

Silicone vs. Metal Hot Stamping Dies: Selecting the Right Tooling for Complex Part Geometries

Featured image for “Automated Hot Stamping for Rigid Plastics: Optimizing Temperature and Dwell Time in Automotive Interiors”
September 16, 2026

Automated Hot Stamping for Rigid Plastics: Optimizing Temperature and Dwell Time in Automotive Interiors

The Hastings Hub

Custom Automation

Featured image for “Integrating Presses into Continuous Lines: Optimizing Cycle Times and Throughput”
September 17, 2026

Integrating Presses into Continuous Lines: Optimizing Cycle Times and Throughput

Featured image for “Minimizing Scrap with Precision Custom Tooling in Hot Stamping”
September 17, 2026

Minimizing Scrap with Precision Custom Tooling in Hot Stamping

Featured image for “Integrating Industry 4.0: Upgrading Press Controls for Data Acquisition and Traceability”
September 17, 2026

Integrating Industry 4.0: Upgrading Press Controls for Data Acquisition and Traceability

Featured image for “Precision Heat Transfer on Technical Textiles: Controlling Pressure and Dwell Time for Synthetics”
September 17, 2026

Precision Heat Transfer on Technical Textiles: Controlling Pressure and Dwell Time for Synthetics

Featured image for “Total Cost of Ownership: Analyzing Air Consumption in Pneumatic vs. Hydra-Pneumatic Presses”
September 17, 2026

Total Cost of Ownership: Analyzing Air Consumption in Pneumatic vs. Hydra-Pneumatic Presses

Featured image for “Scaling Production: When to Transition to Custom Multi-Head Press Systems”
September 17, 2026

Scaling Production: When to Transition to Custom Multi-Head Press Systems

Featured image for “Solving Common Hot Stamping Defects: Foil Flaking, Blistering, and Poor Adhesion”
September 17, 2026

Solving Common Hot Stamping Defects: Foil Flaking, Blistering, and Poor Adhesion

Featured image for “Calculating ROI on Automated Part Feeding Systems for Hot Stamping”
September 16, 2026

Calculating ROI on Automated Part Feeding Systems for Hot Stamping

Featured image for “Silicone vs. Metal Hot Stamping Dies: Selecting the Right Tooling for Complex Part Geometries”
September 16, 2026

Silicone vs. Metal Hot Stamping Dies: Selecting the Right Tooling for Complex Part Geometries

Featured image for “Automated Hot Stamping for Rigid Plastics: Optimizing Temperature and Dwell Time in Automotive Interiors”
September 16, 2026

Automated Hot Stamping for Rigid Plastics: Optimizing Temperature and Dwell Time in Automotive Interiors